Alka Flow - Set of 4 Filters

Nitrate removal filters, particularly ion exchange filters, work by replacing nitrate ions (NO₃⁻) with other ions, commonly chloride ions (Cl⁻).

Ion Exchange Resin: The filter contains a resin that is saturated with chloride ions. This resin is typically made of tiny beads of organic polymer that have sites that hold chloride ions weakly.

Water Flow: As water containing nitrate ions flows through the resin bed, the nitrate ions are attracted to the resin due to their charge.

Ion Exchange: The resin beads release chloride ions into the water in exchange for the nitrate ions. This process happens because the resin has a higher affinity for nitrate ions than chloride ions, causing the nitrate ions to displace the chloride ions.

Removal of Nitrates: The nitrate ions attach to the resin beads, and the now chloride-rich water exits the filter. This reduces the nitrate concentration in the water.

Preparation: The ion exchange resin is preloaded with chloride ions. This is often done by soaking the resin in a solution of sodium chloride (NaCl).

Nitrate Capture: As the contaminated water passes through the resin bed, nitrate ions are attracted to and held by the resin, while chloride ions are released into the water.

Regeneration (if applicable): Over time, the resin becomes saturated with nitrate ions and loses its effectiveness. It can be regenerated by flushing it with a concentrated salt solution, which replaces the nitrate ions on the resin with chloride ions again.

This method is effective for nitrate removal and is commonly used in water treatment systems to ensure safe drinking water. However, it does increase the chloride content of the treated water, which is usually not a problem since chloride is commonly found in water and is generally safe at the levels produced by the ion exchange process.