Advanced Natural Fluoride Removal Filter
Naturally Effective | Superior to Activated Alumina | Made in the USA
Tired of fluoride in your water? The FluorEx™ Filter is a cutting-edge solution designed to effectively reduce fluoride, arsenic, and other contaminants from your drinking water—without using synthetic, aluminium-based media. Instead, it harnesses a proprietary calcium-carbon-phosphate media, offering a natural and highly effective way to clean your water.
Why Choose FluorEx™?
✔ Alkalinity – Helps balance pH for healthier drinking water.
✔ Removes a Wide Range of Contaminants, including heavy metals and organic chemicals.
✔ Tested in Real Conditions – Our results come from real tap water, not just lab tests.
✔ Universal Fit – Works with all standard filter housings (9.75” x 3” / 248mm x 76mm).
What Does It Remove?
Primary Reduction:
✅ Fluoride
✅ Arsenic
Secondary Reduction:
✅ Uranium
✅ Plutonium
✅ Radium
✅ Heavy Metals
✅ Organic Chemicals
Proven Performance – Real Results
Independent testing following EPA standards shows near 100% fluoride removal, even at varying water conditions:
- High Fluoride Levels (2.2 mg/L tap water) → Filtered to 0.1 mg/L
- Fluoride Levels (0.71 mg/L tap water) → Filtered to <0.05 mg/L (Non-Detectable)
These results were achieved in real-world conditions at a practical flow rate of 1.9 litres per minute (0.5 GPM), using municipal tap water.
How It Works
When water flows through the FluorEx™ filter, negatively charged ions (such as fluoride, arsenic, and lithium) attach to the media or are exchanged for natural calcium ions—effectively removing them from your drinking water.
Unlike some filters that claim high fluoride removal in controlled lab conditions (using pure water with only fluoride added), FluorEx™ is tested with real tap water, at real flow rates—ensuring reliable performance in your home.
Filter Lifespan & Replacement Guidelines
The lifespan of your FluorEx™ filter depends on the fluoride concentration in your water:
- 1900 Ltrs at 0.7 mg/L fluoride
- 1140 Ltrs at 1.2 mg/L fluoride
- 570 Ltrs at 2.2 mg/L fluoride
In our own independent testing, at a water flow of about 1.9 litres per minute and fluoride levels around 0.7mg/L, the cartridge removed fluoride to below detectable levels – less than 0.05mg/L.
After filtering around 1,900 litres of water, fluoride removal dropped slightly to about 85%. That small drop is enough for us to recommend changing the cartridge at that point to keep it working at its best.
The testing was done to reflect real household use – turning the tap on and off throughout the day. This gives the filter media a chance to ‘rest’ and work better. Continuous running (like 1,900 litres non-stop) doesn’t reflect how we use water at home and wouldn’t give an accurate result.
Additional Recommendation: We highly recommend our Active Pure filter is installed upstream of the FluorEx filter to to remove heavy metals, so it protects the capacity of the FluorEX Max filter to focus on fluoride predominantly.
Flow Rate: The flow rate can be set up by the installer or by yourself: If your water flow is greater than 1.8 litres/min
Monitoring of usage: We recommend to install a water flow meter to monitor usage.
Dimension:Filter: 69mm diameter by 250mm lengthHousing: 120mm Diameter by 305mm Length
Important Notes:
- If your water has high calcium levels (like from hard bore water), it may slightly reduce fluoride removal, as calcium can interfere with the media’s performance.
- The cartridge is made from all-natural, non-toxic minerals – mainly phosphate, calcium, and carbon.
- All materials are safe for drinking water, including BPA-free and food-grade plastics.
- Made in the USA in specialist water filter facilities with strict quality control.
As for other contaminants – the filter media may also help reduce other chemicals, but our main testing and focus is on fluoride. That’s what we’ve measured most thoroughly.
Does this filter remove arsenic?
